Causes and Control Measures of Carbonization of hot melt adhesive compound machine

The use of hot melt adhesive compounding machine has largely improved our production efficiency, but various problems are inevitable in the process of use. Let's share the reasons and treatment methods for carbide in hot melt adhesive compounding machine.
There are many reasons for hot melt adhesive carbonization of hot melt adhesive compounding machine, of course, the main reason is still the temperature, whether the temperature is too high or too low is the induction factor, of course, the stability of glue is also on the one hand.


So how can we avoid producing too much carbon?
There are two ways of hot melt adhesive of different product types in the plastic box of hot melt adhesive compounding machine. For the above reasons, we need students to do the following in the process of daily use of glue:
Glue temperature can set according to the regulations of the relevant technical parameter value, has the phenomenon of abnormal behavior such as carbonization temperature and working temperature difference, the lid of the plastic box shut down at any time, so as not to affect the surface of high temperature hot melt adhesive and direct contact with the fresh air, accelerated oxidation, long a small amount of glue, glue the adding amount of hot-melt adhesive in the cabinet without too much, Between 1/3 to half of the occurrence of multiple times can be added, has not been repeatedly heated hot melt glue for a long time after cleaning out the new glue, do not use the other two methods of different social properties of hot melt glue.

The adhesive lining of hot-melt laminating machine is made of uniform hot-melt adhesive bonded on the fabric surface.
When used, the bonding lining is trimmed to the desired shape and size, and the side of the hot melt is applied to the back of other fabric materials (fabrics).
It is lined in the inner layer of clothing, as the skeleton of clothing, simplify the production process and time of clothing processing, so that clothing enterprises have lightness, beauty, shape protection, washing resistance, wear resistance and other aspects of the opposite effect.
Interlining processing for general requirements of hot melt adhesive has colorless and tasteless, soft texture, fast bonding, dry and wet washing, adhesive does not affect the brightness of the fabric and other characteristics.
Interlining processing can use a variety of hot melt adhesive, almost all types of hot melt adhesive can be used, which are widely used ethylene - vinyl acetate (EVA) hot melt adhesive, polyamide hot melt adhesive and high pressure polyethylene (HDPE) hot melt adhesive powder, hot melt adhesive used for different purposes and processing methods are also different.

Post time: Jun-03-2019